Replacing uPVC Window Handles
It is simple to swap the handles on upvc windows. The important thing is to ensure that the replacement handle fits the spindle cut out in the window mechanism.
If you follow the steps below any cockspur handle can fit on most windows. The step height of the handle is crucial.
What to Do You Look For?
As time passes, uPVC handles on many windows in the UK may begin to show signs of wear and tear. When this happens, the window handle can become loose or difficult to operate, making it essential to replace it. This is a relatively simple task that can be accomplished by anyone who is comfortable with basic hand tools.
The first step is to make sure the handle is securely attached to the window frame, and is in an open position. The next step is to find the fixing pins or screws that hold the handle in the position it is in. They are usually located on the inside of the handle and can be removed using a screwdriver or pliers.
Once the handle has become loose, it can be removed from its hinges by gently pulling off. Then, you'll need to find a new handle that is the same size and style. This can be done online or in an area DIY store, and it should take around five minutes using the help of a screwdriver.
When replacing a uPVC handle It is crucial to take into consideration the step height. This is the distance from the bottom of the handle to where it is placed on the window frame. It is generally a standard measurement, and it is important to determine the step height of your current handle before purchasing a new one.
Depending on the kind of handle you choose, there are different sizes to choose from. Inline handles are offered for uPVC windows that have centers of 31mm for lugs, while cockspur handles have lug centres of 43mm. Tilt-and turn handles are typically found on uPVC windows. They feature a unique design which allows the window be slid down to let in air and then rotated to fully open the window.
The most common uPVC handle breakage is internal cracking rather than a fracture from the base. This can make it difficult to open. It is crucial to ensure that the replacement handle has the same spindle that was used in your original one.
Remove the old Handle
A poorly fitted or damaged window handles can cause your double-glazed windows to open or close incorrectly, and can cause them to become stuck. There are a myriad of reasons for this, such as general wear and tear, or corrosion of the handle. In these instances it is essential to replace the upvc window handle as promptly as you can to avoid further damage or loss of function.
When replacing the handles of windows made of upvc, you should remove the old handles from the window. Start by removing the screw with the handle when it is in a closed position. After you have removed the screw, you are able to remove the handle. It is possible to make the task easier by using an electronic screwdriver.
It is also important to note that the screws on the handle could be hidden behind plastic caps, therefore it is recommended to use a Stanley knife to the screw covers and take them off. After the old handle has been removed, you should then look at the square cut on the base of the handle to ensure that the new window lock handles are compatible with it. It is essential to measure the length of the spindle on the handle that was used and then compare it with the dimensions of the window mechanism spindle cutout.
The various types of window handles made of upvc are: Espag handles, which feature a central screw that can turn left or right; Cranked handles, that have two screws and are used on tilt and turn upvc windows as well as Spade handles, that have an arm with a flat surface and can be used on either side of the window. Once you have a suitable replacement, it's simply a case of screwing the handle in place and ensuring that the spindle is inserted into the lock mechanism. Once you have done this, tighten the handle to the window frame. Your replacement upvc handles will now be secure.
Take a measurement of the Spindle
If you're looking to replace a Upvc handle that has fallen, it's likely the spindle that holds it in place is damaged or loose. In some cases this can be fixed with pins or screws to secure it. In certain situations it is necessary to replace the handle. There are a variety of upvc handles. upvc door handle include espagnolette handles inline as well as cockspur handles. tilt and turn handles. Each handle type has its own procedure for installing and removing the handle.
It is important to measure the handle before buying the replacement. This will ensure that the handle will fit the window properly and be the correct size. All handles are calibrated according to industry standards, making it easy to identify the correct size.
To measure the size of your handle, first, remove it from the window by turning it back to the open position. You should be able see the dimensions of the pin or screw that secures the handle. Make use of a ruler or tape measure to determine the length the spindle is. Once you have the length of your spindle it is possible to purchase a replacement that is exactly the same size.
When buying a replacement, it is important to be aware of the step height of an window handle made of upvc. The step height is the distance from the bottom of the handle to the point at which it rests on the frame. Typically, this will be approximately 21mm for uPVC windows or 9mm for aluminum. To make sure that the new handle will fit it, you can drop something into the gap to check how far it goes before it comes into contact with an obstruction.
Cockspur handles may have different backsets depending on what type of window you put them in. Inline Espag handles have a standard height of 43mm from centre to centre (2 fixing points). Cockspur handles however they have different backsets according to the design of the window they're in. This is because they have an extension spur that extends from the handle and locks over a cockspur wedge striker plate.
Install the new handle
When you've chosen a new handle, make sure you align it with the screw holes on the door and fix it using the screws provided. If you're also replacing the latch lever the lever can be mounted in a similar way to the main door handle. After that, attach the door trim to conceal the mounting screws and finish the project.
Tips: To remove a metal head from a wedge made of wood, place the handle on the floor so that its wide end is on the ground. Then, use an hammer and tap the thin end. Be careful not to damage the handle or the spindle.